Admin: Created page with "== Design Files == * The Hardware design files: http://downloads.canaan-creative.com/hardware/A3222/avalon4/ * A3222 ASIC Datasheet: http://downloads.canaan-creative.com/hardw..."

2019-04-04T08:01:00Z

Created page with "== Design Files == * The Hardware design files: http://downloads.canaan-creative.com/hardware/A3222/avalon4/ * A3222 ASIC Datasheet: http://downloads.canaan-creative.com/hardw..."

New page

== Design Files ==
* The Hardware design files: http://downloads.canaan-creative.com/hardware/A3222/avalon4/
* A3222 ASIC Datasheet: http://downloads.canaan-creative.com/hardware/A3222/datasheet/

Package: QFN56-8X8, 0.5mm pitch
Process node: 28nm
Core voltage: 0.65 ~ 0.8V
Chip frequency: 400MHz
Hashrate: 25Gh/s
Power usage: 0.4-0.6J/Gh on ASIC side
VDDIO: 1.5 ~ 2.5V

== SPI Example ==

a real data:
1st:
work n chip1
{576'hc16801619d8d4242e06e5fab25a54bbe222e8b877848c34beea79cd6528caf7e33cde02a983dab158119ce2a1c9fc4eddac8ce296d0fd9da6e18f645087e051a2d547050e8dc86b1, 64'ha, 32'h1, 32'h1, 32'h1}
work n chip0
{576'h1bed3ba0a2cb45c1d8f8ef6712146495c44192c07145fd6d974bf4bb8f41371d65c90d1e9cb18a17fa77fe7d13cdfd7b0063910762a5f25c06b168ae087e051a895170504ac1d001, 64'h5, 32'h1, 32'h1, 32'h1}

2nd:
work n+1 chip1
{576'h0, 64'hb, 32'h1, 32'h1, 32'h1}
work n+1 chip0
{576'h0, 64'h6, 32'h1, 32'h1, 32'h1}

3rd:
work n+2 chip1
{576'h0, 64'hc, 32'h1, 32'h1, 32'h1}
work n+2 chip0
{576'h0, 64'h7, 32'h1, 32'h1, 32'h1}

then get nonce 32'h1beebba0 for chip0, 32'hc1698161 for chip1;

== Avalon4 ==
Each module carry 40 A3222 ASICs, the module should be working at 1TH/S and using ~680W power.

== Physical Distinction between 4.0 and 4.1 machine ==
=== LED Board ===
*‘Ver. 4.X’ is marked in the bottom right-hand corner of the lights panel.
<br/>

=== PMU ===
The other way is open the case to check PMU (Power Module Unit)
* (On the left) Three 270uf 16V and two 820uf 16V blue solid capacitors are used in 4.0 version.
* (On the right) Four 100uf 16V and four 560uf 6.3V purple solid capacitors are used in 4.1 version.
<br/>

=== Controller ===
* The hardware is the same in 4.0 and 4.1, the only different is the firmware

== LED ==

{| class="wikitable sortable" border="1"
|-
! LED
! OFF
! ON
! BLINKING
! MEMO
|- valign="top"
| ERR
| -
| '''POST failed''' or '''One module dead'''
| Manual
|
|- valign="top"
| WARN
| Hashing
| Idle mode
| '''Fan is 0''' or '''Overheat'''
|
|- valign="top"
| TXD/RXD
| No data
| -
| Data transferring
|
|- valign="top"
| N1/N2
| No nonce
| -
| Found one nonce
|
|- valign="top"
| PG1/PG2
| -
| Power good
| Some of small PMU failed
|
|}

== IIC ==

== Avalon4 CGMiner Under Ubuntu 14.04 ==
=== Download ===
Inside your home directory, download Cgminer
git clone https://github.com/Canaan-Creative/cgminer

=== Compile ===
cd cgminer
git checkout origin/avalon4 -b avalon4
./autogen.sh --enable-avalon4
make -j 4

=== Run ===
sudo ./cgminer --avalon4-fan 60 --avalon4-freq 200 --avalon4-voltage 7125 --lowmem -o http://stratum.pool:3333 -u work -p pass
or
sudo ./cgminer --avalon4-fan 60 --avalon4-freq 200 --avalon4-voltage 7125 --lowmem -o http://stratum.pool:3333 -u work -p pass --api-allow W:192.168.2,W:192.168.2.1 --api-listen $@ 2>./log

=== Tweak ===
* Led
Format: '''ascset|ASCN,led,modularid'''
eg: cgminer-api "ascset|0,led,1"

* Fan
Format: '''ascset|ASCN,fan,fanmin[-fanmax]'''
eg: cgminer-api "ascset|0,fan,10" or cgminer-api "ascset|0,fan,10-100"

* Voltage
Format: '''ascset|ASCN,voltage,MMID-value[-miner_id-val_offset]'''
eg: cgminer-api "ascset|0,voltage,1-7750"
cgminer-api "ascset|0,voltage,1-7750-0-125"

== Technical details ==
* The auc take '''1~2ms''' betwwen write and read. even the polling delay is 0 (4800 means 1ms)
* The cgminer each polling takes '''~20ms'''. even the polling delay is 0ms

== MM Notes ==
=== [https://en.bitcoin.it/wiki/Avalon_mm_tools mm-tools for Raspberry Pi (Model B)] ===

=== Compile flags ===
{| class="wikitable"
! Value
! BOOTLOADER
! MM41
! DEBUG
|-
| 0
| No bootloader
| Support MM-4.0
| Disable debug
|-
| 1
| Support bootloader
| Support MM-4.1
| Enable debug
|}

== User manual ==
=== Hashrate Refrence ===
{| class="wikitable"
! MM Ver
! Chip Freq
! Voltage
! Hashrate
! Power usage
|-
| 4.0
| 420:390:360
| 8000
| 980G
| 594Watt
|-
| 4.0
| 450:390:370
| 8125
| 1T
| 640Watt
|-
| 4.0
| 450:400:390
| 8250
| 1.1T
| 655Watt
|}

{| class="wikitable"
! MM Ver
! Chip Freq
! Voltage
! Hashrate
! Power usage
|-
| 4.1
| 375:300:275
| 7000
| '''800G'''
| 419Watt
|-
| 4.1
| 375:350:300
| 7500
| '''866G'''
| 457Watt
|-
| 4.1
| 420:390:360
| 7625
| 980G
| 542Watt
|-
| 4.1
| 450:390:370
| 8000
| 1T
| 600Watt
|-
| 4.1
| 500:450:430
| 8125
| 1.14T
| 710Watt
|-
| 4.1
| 550:500:450
| 8250
| 1.25T
| 800Watt
|-
| 4.1
| 570:510:470
| 8375
| '''1.3T'''
| 990Watt
|}

=== AUC ===
Avalon USB2IIC converter, USB VID:PID '''29f1:33f2'''

Provided by cybtc

=== LED ===
* PWR: Power indicator
* R: AUC response error
* G: IIC Xfer
* B: AUC init

== AUC Firmware ==

=== [http://downloads.canaan-creative.com/software/avalon4/auc/20141122/ 20141122] ===
* AUC version: '''AUC-20141122'''
* Reset asic when usb config changed(true->false)

=== [http://downloads.canaan-creative.com/software/avalon4/auc/20141105/ 20141105] ===
* AUC version: '''AUC-20141105'''
* Code cleanup
* Improve for firmware burning

=== [http://downloads.canaan-creative.com/software/avalon4/auc/20141103/ 20141103] ===
* AUC version: '''AUC-20141103'''
* Add watchdog
* Code cleanup

=== [http://downloads.canaan-creative.com/software/avalon4/auc/20141027/ 20141027] ===
* AUC version: '''AUC-20141027'''
* Change Manufacturer to [http://www.canaan-creative.com CANAAN]

=== [http://downloads.canaan-creative.com/software/avalon4/auc/20141019/ 20141019] ===
* AUC version: '''AUC-20141019'''
* First version of AUC firmware
* Source URL: https://github.com/Canaan-Creative/Avalon-USB-converter

== RPi/703N Firmware ==
=== Daily Building ===
* '''http://build.canaan-creative.com:8080/~mikeqin/build/'''

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20150331_1012/ 20150331] ===
* Add --avalon4-freezesafe option
* Fix hash rate counter
* Change default fan & overheat for separate miningmode
* Update cutoff process when Avalon4 is overheat
* Correct asic workflow when cutoff is off
* Enable voltage adjustment when cutoff is off
* Enable setting LED on/off through API command
* Add upgrade and status button when upgrade mm firmware finish
* Support mm-tools on TL-WR703N

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/ 20150213] ===
* Increase the voltage adjustment range for individual PMU
* Display voltage refrence in CGMiner status when CGMiner run with debug
* Add mining mode option for Avalon4
* Fix cutoff for individual voltage adjustment
* Fix hash counter when used a broken Avalon4 (DH almost 100%)
* Change voltage adjust interval from 8m to 30s (Support all MM4.1 and MM4.0 >= 401501-4778d610)
* Add freeze safe mode function
* Update frequency table (Step:125)
* Rewrite mm-tools, it will not compatile with the old one

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20150119_1609/ 20150119] ===
* Support auto adjust voltage individually(Only support on MM-4.1, MM4.0(>401501-d17f4a10))
* Support temperature display when it is < 0C.
* Support mm firmware upgrade through LuCI( Caution:Only for professional users!!!)
* Fix wifi cann't work on TL-WR703N
* Add mining mode
* Update the set_voltage method to one by one
* Change localwork statistics from software to hardware.

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20141213_1015/ 20141213] ===
* Improve the voltage increase modules
* Fix duplicated local work & error work
* Fix the default settings of new module
* Fix MM41 voltage setting
* Add UI for password change
* Optimise the process of cgminer-status
* Fix display on avalon index page

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20141203_1615/ 20141203] ===
* Add module elapsed time
* Modify the decrase offset from 250 to 4*125,increase step to 125

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20141127_1341/ 20141127] ===
* Add TL-WR703N support
* Add automatic voltage support
* Add GHS5m and DH%5m for each module
* Fix AUC ADC value

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20141124_1908/ 20141124] ===
* Add MM41 support
* Add mm count value in API status
* Fix the matching_work error
* Update dh calculation for luci
* Change theme name to avalon

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20141118_1858/ 20141118] ===
* Adjust module voltage by ascset
* A new theme was added to luci,and use it as default

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20141112_2245/ 20141112] ===
* Support RPi B/B+ version
* Change default IIC speed from 1M to 400K
* Add Avalon4 MM rolling ntime offset
* Update fan adjustment
* Add a new luci theme for Raspberry Pi
* Display DNA on cgminer status page

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/20141029_1407/ 20141029] ===
* First version of Avalon4 firmware

=== [http://downloads.canaan-creative.com/software/avalon4/openwrt/NEXT-TESTING/ NEXT-TESTING] ===
* NOTICE: Only for testing

== Issues ==
* WIFI cann't work on TL-WR703N
This issue was caused by ubus, We can enable or disable it through the button in the webpage,
but the display is invalid when wifi was opened.
Work around method: https://github.com/openwrt/luci/commit/ecb0c2f11b861e5035b0397d2396ee4b5e9b3c3e

* Local hashrate count lower than pool or actual.
Change localwork statistics from software to hardware.

== MM Firmware (For MM-4.1) ==
=== Daily Building ===
* '''http://build.canaan-creative.com:8080/~mikeqin/mm41/'''

=== [http://downloads.canaan-creative.com/software/avalon4/mm41/2015-03-12/ 20150312] ===
* Version '''411503-9281cd10'''
* Fix mm firmware revert
* Check pg when mm working
* Fix boot failure(Change bootloader with ila)

=== [http://downloads.canaan-creative.com/software/avalon4/mm41/2015-02-14/ 20150214] ===
* Version '''411502-d517e210'''
* Add a bootloader feature, auto reboot after download
* Feed watchdog when get package because it's a block function
* Fix system crash when modify the miner_id by unintentionally
* Change compile flag from MBOOT to BOOTLOADER
* Support mm config load & save

===[http://downloads.canaan-creative.com/software/avalon4/mm41/2015-01-15/ 20150115] ===
* Version '''411501-d17f4a10'''
* Fix negative temperatures
* Support MM Tx reset by CGMiner

===[http://downloads.canaan-creative.com/software/avalon4/mm41/2014-12-31/ 20141231] ===
* Version '''411501-08e45110'''
* Based on MM-4.0 '''401412-d31c2c10'''
* Turn down cpu frequency(100MHz -> 50MHz)
* Adjust clk of three domains.
* Fix LED warning blink when get new stratum
* Support voltage adjustion by miners
* Put the frequency table to CGMiner
* Miner's localwork statistics by HW

===[http://downloads.canaan-creative.com/software/avalon4/mm41/NEXT-TESTING/ NEXT-TESTING] ===
* Reboot mm automatically after upgrade
* Drop mboot,use a method to upgrade
* Store extra info for MM

== MM Firmware (For MM-4.0) ==
=== Daily Building ===
* '''http://build.canaan-creative.com:8080/~mikeqin/mm/'''

=== [http://downloads.canaan-creative.com/software/avalon4/mm/2015-03-12/ 20150312] ===
* Version '''401503-9281cd10'''
* Fix mm firmware revert
* Check pg when mm working
* Fix boot failure(Change bootloader with ila)

===[http://downloads.canaan-creative.com/software/avalon4/mm/2015-02-14/ 20150214] ===
* Version '''401502-d517e210'''
* Add a bootloader feature, auto reboot after download
* Feed watchdog when get package because it's a block function
* Fix system crash when modify the miner_id by unintentionally
* Change compile flag from MBOOT to BOOTLOADER
* Support mm config load & save

===[http://downloads.canaan-creative.com/software/avalon4/mm/2015-01-19/ 20150119] ===
* Version '''401501-4778d610'''
* Support voltage adjustion by miners
* Put the frequency table to CGMiner

===[http://downloads.canaan-creative.com/software/avalon4/mm/2015-01-15/ 20150115] ===
* Version '''401501-d17f4a10'''
* Turn down cpu frequency(100MHz -> 50MHz)
* Adjust clk of three domains.
* Fix LED warning blink when get new stratum
* Miner's localwork statistics by HW
* Fix negative temperatures
* Support MM Tx reset by CGMiner

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-12-19/ 20141219] ===
* Version '''401412-d31c2c10'''
* Fix temperautre read. read once per second not 200 times per second
* Compile MM under Virtual Machine may cause unknown problem. this version compile under ubuntu 14.04

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-12-17/ 20141217] ===
* Version '''401412-39242210'''
* Change api for miner work statistics
* Fix the g_local_work count
* Fix temperautre < 0
* Fix led display when post failed

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-12-13/ 20141213] ===
* Version '''401412-7ef4ab10'''
* Support MBOOT
* Keep the nonce2_offse and nonce2_range since g_module_id didn't change
* Keep mm working when temp is greater than IDLE_TEMP
* Add parameter for test core count
* Warning when no fan connect

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-11-22/ 20141122] ===
* Version '''401411-cad52ec0'''
* Fix the type on DEFAULT MDOULES
* Fix the led status when warning
* Add MM4.1 defines
* Add new power module in test/

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-11-11/ 20141111] ===
* Version: '''401411-5965e0f0'''
* Add ntime offset configure from outside
* Reset globe values when idle
* Update ChangeLog, README and MM_VERSION

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-11-09/ 20141109] ===
* Version: '''401410-c6ba5180'''
* Big Code cleanup, Update MM protocol.
* Update timeout value to 90% the theory value.
* Fix the hashrate couning.
* Fix watchdog issue. enable watchdog.
* Remove g_module_id check since we use I2C
* Move adjust fan in polling package.
* Update MM idle default fan speed to 10%

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-11-04/ 20141104] ===
* Version: '''401410-223a1c50'''
* Update idle timeout from 5s to 3s
* Display ID on controller LEDs for debug
* Fix the automatic module detect
* Disable watch dog
* IDLE check when both (new stratum) and (module id) was configured

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-11-01/ 20141101] ===
* Fix the front led display
* Cutoff power after testing

===[http://downloads.canaan-creative.com/software/avalon4/mm/2014-10-30/ 20141030] ===
* First version of Avalon4 firmware

===[http://downloads.canaan-creative.com/software/avalon4/mm/NEXT-TESTING/ NEXT-TESTING] ===

== Design file ==
* [http://downloads.canaan-creative.com/hardware/A3222/ http://downloads.canaan-creative.com/hardware/A3222/]

== Links ==
* [http://www.yibite.com/article-4731-1.html Avalon的第四代BTC挖矿芯片A3222 通过了初步的功能测试]
* [http://www.cybtc.com/article-1508-1.html 阿瓦隆4比特币矿机1T单模组彩云评测]
* Review: http://www.cybtc.org/article-70-1.html
* Review: https://bitcointalk.org/index.php?topic=1008726.0
* Review: https://bitcointalk.org/index.php?topic=1008726.msg10946156#msg10946156

==Source==

[http://bitcoin.it/ http://bitcoin.it/]
==See Also on BitcoinWiki==
* [[Gaia Online]]
* [[CEX.IO Official Blog]]
* [[Dapp Life]]
* [[Bitcoin Jobs Report]]
* [[Lets Talk Bitcoin]]

Avalon4 - Revision history

Admin: Created page with "== Design Files == * The Hardware design files: http://downloads.canaan-creative.com/hardware/A3222/avalon4/ * A3222 ASIC Datasheet: http://downloads.canaan-creative.com/hardw..."